LED Flashlight

by charlie-lee-rhee in Circuits > LEDs

4732 Views, 10 Favorites, 0 Comments

LED Flashlight

this instructable will tell you how to build a LED flashlight out of a broken flashlight.

Disassemble the Flashlight

my flashlight had a broken switch and a cracked bulb. so, i opened it up.

Get the LED

i used a single blue LED. It won't be that bright, but it was the only thing i had. I also used a 2-hole connecter for the LED. I also added a bulb head so it looked like a bulb.after that, I rigged the LED on the reflector dish.

The Switch

the original switch was broken, so i used a button switch. i used a hot glue gun to put a hole, and fit the switch inside.

The Eletronics

get some batteries. i used 2 AAA batteries and connected them to the switch and the LED.

Reassembling

After that, reassemble the flashlight and It's done!