Knife Making-micarta Handle Tutorial

by knifemacking in Workshop > Metalworking

2447 Views, 21 Favorites, 0 Comments

Knife Making-micarta Handle Tutorial

This instructable show how to easily make a micarta handle for your knife

Blade

first of all you need to drill hole in your blade for the rod to pass

Shape of the Handle

after you need to shape your handle and cut it

Hole

after this you drill the same hole as on the blade but in the micarta

Glue

when it's done glue everything together with the pin

Sanding

when it's dry sand the handle until you like the shape.

Polishing

for the last step i use the polishing wheel to make it shinny. The handle is ready for use!!