K'nex Tilt Table
by TheEngineeringFreak in Living > LEGO & K'NEX
1483 Views, 0 Favorites, 0 Comments
K'nex Tilt Table
Hi. As my first instructable, I'm here with a tilting marble labyrinth - The Tilt Table. You can customize the maze on it however you want and I noticed that the table can be used as a boxing rink. For the boxing ring, only build step three. Have fun with it!
Also, as this is my first instructable, feel free to comment but i would like no inappropriate language please, thank you.
Also, as this is my first instructable, feel free to comment but i would like no inappropriate language please, thank you.
Piece Count:
The piece count on this model isn't very big and it can be changed depending on how big you want the table to be. If you want to make a bigger sized model, replace the blue rods for yellow, the yellow rods for green/red rods and the green/red rods for grey/blue rods. You will also need a Large Piece of Cardboard with a size of 20.5 by 20.5cm OR 29.5 by 29.5
I would also suggest that if you want to make it you should get the pieces beforehand.
I may be slightly inaccurate here so please excuse me.
Rods:
Yellow - 18
Green/Red - 4
Blue - 8
White/Silver - 17
Black/Green - 14
Connectors:
Small black with clip - 2
4-point locks - 45
7-point locks - 9
5-point - 4
2-point (opposite ends) - 6
1-point - 1
Other:
A Ball (I use the old k'nex balls) - 1 or more
Blue Spacer - 2
For the Labyrinth Roof and walls:
Blue/Grey Rod - 8 Least (more are optional)
For Each Wall Segment:
Green/Black Rod - 1
2-Point Connector (opposite ends)
5-Point Connector - 1
And 1 green/black connector to join segments.
I would also suggest that if you want to make it you should get the pieces beforehand.
I may be slightly inaccurate here so please excuse me.
Rods:
Yellow - 18
Green/Red - 4
Blue - 8
White/Silver - 17
Black/Green - 14
Connectors:
Small black with clip - 2
4-point locks - 45
7-point locks - 9
5-point - 4
2-point (opposite ends) - 6
1-point - 1
Other:
A Ball (I use the old k'nex balls) - 1 or more
Blue Spacer - 2
For the Labyrinth Roof and walls:
Blue/Grey Rod - 8 Least (more are optional)
For Each Wall Segment:
Green/Black Rod - 1
2-Point Connector (opposite ends)
5-Point Connector - 1
And 1 green/black connector to join segments.
Base
I put a label on each picture (bottom left or right) so you know where you are.
P1: Build this
P2: Build this
P3: Attach as shown
P4: This is what you will get.
P5: Build this
P6: Another View
P7: Attach as Shown
That's the base done. Put this to the side until step 5.
P1: Build this
P2: Build this
P3: Attach as shown
P4: This is what you will get.
P5: Build this
P6: Another View
P7: Attach as Shown
That's the base done. Put this to the side until step 5.
The Table
This is the table that the ball rolls on. For this you need the cardboard.
Small Size : 20.5 X 20.5cm
Large Size : 29.5 X 29.5cm
(These are the Dimansions of A4 paper)
P1: Build this
P2: Build this
P3: Build this
P4: Build this
P5: Attach as ahown
P6: Attach the bottom part (Black clip down)
P7: Push in the cardboard and tape where nesesary.
Small Size : 20.5 X 20.5cm
Large Size : 29.5 X 29.5cm
(These are the Dimansions of A4 paper)
P1: Build this
P2: Build this
P3: Build this
P4: Build this
P5: Attach as ahown
P6: Attach the bottom part (Black clip down)
P7: Push in the cardboard and tape where nesesary.
Roof and Layout
The Layout in this model is held up by the roof.
P1: Make one of what is on the right and at least 4 of the pieces on the left (must be an even number).
P2: Evenly space half of the long pieces along the box.
P3: Evenly space the other half, waeving them in and out.
P4 Slide on the table.
P5: This is an example of a wall. If you weave the blue rods in and out then they will not give way to the ball
P1: Make one of what is on the right and at least 4 of the pieces on the left (must be an even number).
P2: Evenly space half of the long pieces along the box.
P3: Evenly space the other half, waeving them in and out.
P4 Slide on the table.
P5: This is an example of a wall. If you weave the blue rods in and out then they will not give way to the ball
Usage Ideas
Just a couple of ideas for using it. I've told you how to make a labyrinth but you can also:
Use just the table as a boxing rink
Take the roof off and make some artwork by splashing the ball with some paint. Pop a square of paper on the cardboard and off you go!
Got any more Ideas? Post them below.
Use just the table as a boxing rink
Take the roof off and make some artwork by splashing the ball with some paint. Pop a square of paper on the cardboard and off you go!
Got any more Ideas? Post them below.