Kirby Car
I created a cute Kirby-themed car and attached a 3d-printed cage reinforced with string to contain an egg and have the egg survive a high-speed crash.
Supplies
Materials
- Wheels
- 2 Wooden Sticks
- Wood block
- More wood
- Paint
- Pen
- Tape
- Cotton balls
- Velcro
- String
Tools
- Saw machine
- Hot glue
- 3D printer
Draw the Initial Concept
Draw the initial concept of the vehicle on a piece of paper. In this case, it is a wooden truck with wheels.
Grab a Block of Wood
Find a rectangular block of wood to carve into a truck shape
Carving Drilling Attaching
Carve the block of wood with a saw to make the front look more car-like, if you choose to do so
Drill two long holes going deep through the block to the other side
Insert wooden sticks
Add any wheels, I used 3d-printed wheels.
The Cage
Now that we are finished with the key features of the truck, try your hand at modeling a cage for the egg. If you're not good at modeling, then you can import a free model you can find online, no worries. Then 3d print it.
Personally, mine lacked a roof or floor, so I cut up some wood and hot glued one piece to the bottom and glued Velcro onto the top of the cage and the opposite velcro onto the remaining wood square, so I can freely open and close it. (However I advise against it, since it frequently broke.)
If you want to view my design, check it here.
Finishing Touches, and Make It Cute!
You can either hot glue the cage to the top of the truck or do something unusual like me, and attach the cage to the car by a string. Fill the cage with cotton balls, wrap the cage around with duct tape to keep the cotton balls in, and insert the egg in the middle. Then make it look awesome! I themed mine around the Kirby car from Kirby and the Forgotten Land, since that was pretty cute.
That's All Folks
Thank you for reading!