Ironman Repulsor Prop Out of Cardboard and Used Can

by zion.dummy1 in Craft > Reuse

770 Views, 1 Favorites, 0 Comments

Ironman Repulsor Prop Out of Cardboard and Used Can

This is pretty easy and I made in 1 or 2 hours.

Supplies

Can
Any tape
Cardboard
Cutter
Glue gun

Cut the two metal edges of the can by using the cutter.

Once done, make a hole in the top metal edge of the can that can fit the bottom edge of the can.

Put hot glue then stick it to the unfinished repulsor.

Get cardboard then fit your hand.

Done! 👍