Infrared Alarm Sensor

by Blakenels in Circuits > Sensors

2098 Views, 23 Favorites, 0 Comments

Infrared Alarm Sensor

This device will set off an alarm if someone try's to steal something from you.

You will need an Arduino, bread board, five wires, normal alarm, and a IR sensor

You will need to set up the wires this way in the right areas so they can sink with the code. You can find a code on the internet, you may need to change it so it will work with the sensors and alarm. Try to find a small box to fit everything into.

I am using just a normal box for this demonstration, you will be able to put this alarm almost anywhere. I suggest taping down the box and wires so they don't fall out.

You will also need a power source for the Arduino, this will not take that much power. Mine is running off of 3.3V. It should be able to fit in the box.

https://youtu.be/gIkUx_YPKCI here is a link to a video to show that it works

This is where I got my code from. I had to change it some to work for my expectations. https://learn.adafruit.com/ir-breakbeam-sensors/overview Good luck in making this project.