How to Wire an Outlet

by drewgibbons in Circuits > Tools

103 Views, 0 Favorites, 0 Comments

How to Wire an Outlet

This is a how to guide for how to wire an outlet.

Supplies

must have ground wire, black wire, white wire, voltage tester, screw driver and decora ouutlet and a wall plate

1

If incompetent electrically, don’t attempt this instructable


2

First, go to Home Depot


3

Buy Decora 15 Amp Tamper-Resistant Slim GFCI Receptacle/Outlet

4

Make sure you have a flathead screw driver, some wire strippers, and a voltage tester


5

Go to the wall where the outlet is going into(there will be hole in wall with wires accessible

6

Test wires with a voltage tester

7

If it's live, then turn off the breaker


8

Identify your black wire(hot) your white wire(neutral) and bare

9

Strip off ¾ off an inch off the end of the black wire


10

- Insert the black wire into the gold screw. Make sure it is tight. Put it on the left side of the screw when inserting

11

Strip off ¾ of an inch from the end of the white wire

Insert the white wire into the silver screw. Make sure it is tight, put it in the left side of the screw when inserting


12

Insert the ground wire into the green screw make sure it is tight

13

insert resptical into the hole for the wall


14

Line up holes in reseptical with holes for screws in the wall

Insert screws


15

Now get a cover for the receptacle and insert it over the receptacle

Insert screws