Homemade Bandsaw Box

by Maker2_0 in Workshop > Woodworking

1220 Views, 7 Favorites, 0 Comments

Homemade Bandsaw Box

Made out of birch plywood and love.

Glue Up

This box is made out of 3/4 inch birch plywood layered using Titebond II wood glue.

Hollow It Out

Then taken to the bandsaw and hollowed out.

Add Top and Bottom

I cut a separate piece of 3/4 inch birch ply for the top and used a nice scrap of 1/4 inch ply for the bottom just so it wouldn't look like a stack of wood with hardware on it

Finish It Up!

I then went to the hardware store and bought some brass hardware. I rounded over the edges just to make it look more uniform.