Halloween Hulk

by goodreaupeter2 in Craft > Costumes & Cosplay

14 Views, 0 Favorites, 0 Comments

Halloween Hulk

I made a 6' 2" Hulk for Halloween of 2026 and enjoyed the crafting of this project, some of the ideas I found were in various places on the internet. I started this hobby after I had retired and purchased a 3D printer to enhance some the pieces of the projects I began making

Supplies

Duct tape dummy, 1 2xl lycra zip up suit, spray foam, spray glue, 5" platform boots, 4" foam, lycra material 3Dprinter, green led light strings, rubber spray sealant 2cans of spray foam

Head and Hands

This was my 1st build for Halloween 2026, I'm retired and have plenty of time to complete these type of projects, which I really enjoy doing. I have a 3d printer and found and purchased 2 stl files to print. The first was a complete Hulk magnet helmet, I used a set of pre printed calipers to measure my head, then converted inches to mms and spliced the helmet to fit 4 build plates. Glued the helmet pieces together, added the 8x2mm magnets to the inside and out of the helmet, then primed and painted. I added foam to take up any space also for comfort. On to the second stl print, which were the huge Hulk hands and forearms, This print was also 4 build plates and took days to print, both filaments were PLA and the hands had a built in bar to hold onto.

The Body

The next thing I worked on was the body, I made a duct tape mannequin and put 2xl lycra body suit over it. Taking the 4" foam and started shaping it into muscle sets abs, chest, biceps, shoulders triceps, traps, carefully scooping out the backside of the foam to make lighter and more flexible, also easier to adhere to the body suit. I sprayed adhesive glue to the foam muscle shapes and fabric, waited 5-10 minuets until the glue became tacky and placed the foam into their groupings. I continued this process working from front to back and the upper and lower legs. I then cut the lycra material to fit over the individual muscles, spraying the lycra and foam and forming a skin .layer. Once this step was complete I sprayed a rubber sealant over the entire form and let cure and harden for a few days. Leafy green was the color I found for my base coat of spray paint, I layered the paint with lighter and darker shades of yellow, fluorescent green and black.

The Feet and Lights

The making of the feet was fairly easy, I found a pair of 5" platform boots with laces and side zippers size 10 for $50. Took 2 large pieces of 4" foam and traced the foot of each boot onto the foam and cut the out the center. I then drew the shape of a left and right foot complete with toes and cut them both out. I used a can of spray foam for each boot and layered the foam around the boot and the edges of the 4" foam built it up then let it harden over night. the next day I used a foam knife to carve and shape the boots to look like feet. I again glued the lycra material over the foam then sprayed the rubber sealant over the material. Painted the feet and moved on to gluing the led fluorescent string lights to the arms and chest to give the illusion of gamma blood pumping through Hulks veins. I ordered a pair of white contacts to go back to Bruce Banner getting mad, then put on a pair purple size 5x shorts and added green led lights to the inside of the the helmet and added foam liners to the hands and forearms. Won 1st place in our American Legion Halloween contest and all the kids loved it!