Half-Life 2 HEV

by KiloByteMike in Craft > Costumes & Cosplay

58 Views, 1 Favorites, 0 Comments

Half-Life 2 HEV

I must have been around 8 years old when I was introduced to the Half-Life video game series. The protagonist, a 27-year-old theoretical physicist from MIT named Gordon Freeman wields a crowbar while sporting his high-tech armored suit called the HEV, and works his way through zombies to fight off an alien race that has conquered earth. In game, Gordon was a symbol of hope for the resistance, and from the first time I played the game, I just imagined how cool it would be to have armor like he did, so I made it a point to do a Gordon Freeman cosplay in the future.

Supplies

Luckily, this is just a cosplay, so we don't have to worry about welding metal together, or investing in radiation protection. The following will be needed however:

  1. 5mm EVA craft foam (about 3 rolls of 60in x 24in)
  2. Upholstery
  3. Hot glue/contact cement (Ideally both)
  4. Gray turtleneck
  5. Gray pants
  6. Plastic buckles
  7. light-colored marker
  8. black fabric for straps
  9. Prop Glasses
  10. Lots of acrylic/spray paint
  11. Craft-Knife
  12. Gloves
  13. Boots
  14. Gray pleather or another kind of fabric
  15. Red pleather or another kind of fabric
  16. soldering iron (optional)
  17. Goatee (optional)

Templates and Sizing

Any good foam cosplay begins with templates and sizing. Free templates for cosplays exist, but in this case, I hadn't found any, so I had to design my own. Lucky for us though, this cosplay is primarily basic geometric shapes. Using reference images online, I took the basic shapes of the armor and copied them onto a piece of paper while upscaling them to a size I thought would fit me, which was 4 times. I was using my phone for the images, and every inch on a straight edge would be 4 inches in real life. Using the same upscaling ratio will ensure the pieces remain proportional with the source material. I find it really helpful to tape together all the pieces of paper and actually test how everything fits with itself, and my own body. Once all of your pieces fit nicely, you can carefully, disassemble them, and start tracing them onto your sheets of foam with your marker.

Cutting and Gluing

Once everything is traced onto foam, you can begin cutting your pieces using your craft knife. Certain cuts will require angled edges. When working on a geometric item such as this, ANGLED CUTS ARE ESSENTIAL. Take your time and refer back to your source material to see which cuts need angles and which don't. Perfecting cuts can be tedious, but gluing is the fun part. I find contact cement to be a very good tool, as it is strong, yet flexible. Keep in mind, contact cement releases HARMFUL FUMES, and DOES NOT LIKE HUMAN SKIN, so make sure to work in a well-ventilated environment with a mask and proper gloves. Bet you didn't expect to be working with anomalous materials like Gordon himself. I ran out of contact cement halfway through this cosplay but found hot glue to also work quite well, just keep in mind it is harder to fix if an error is made, and must be worked with fast.

Prepping and Painting

Now that we have the structure of the armor put together, we can ensure its properly worn on our bodies. It would be near impossible to put on Gordon's upper chest armor if it was all closed off, so we have to cut somewhere to make it equip-able, otherwise we run the risk of tearing the seams we just glued together! I found that cutting the sides under the armholes allows for the most movement. Using strips of fabric, we can attach the buckles to the insides of the armor to keep the newly cut sides closed when we need them to be. This part is optional, but you may want to add battle damage. If that's the case, you can use a soldering iron to score damage into the armor. As always, make sure your surroundings are well-ventilated, and wear a mask. Congratulations on making it this far! You've gotten past the most demanding part of the cosplay process. Painting is where I usually have the most fun. Before painting, I recommend the surface you are painting on is black, as the color will stand out more. You can either just use black foam or apply black spray paint to your surfaces. If you were decided to add some damage to your armor, and want to make it stand out more, you can weather your armor, using watered down paint to get into scores and seams, and wiping off excess paint.

Putting It All Together

I like to add depth to my cosplays, so for the few finishing touches, I focused on the inside of the armor. Using cushion foam wrapped in red pleather, I lined the inside of the collar, making sure my neck and head still had enough room to fit. Gordon's midsection is composed of four individual plates of armor, so I assorted 4 rings of EVA foam wrapped in dark gray pleather to overlap when wrapped around my lower torso. the use of individual plates will allow us enough mobility to bend over and turn our bodies. For the arm armor, I actually glued the pieces to the turtleneck, but I wasn't so willing to sacrifice the pants, so instead I suspended the leg armor from the stomach plates using more of that fabric we used for our buckle straps. I used an old pair of gloves for my hands and tucked the shin armor over some boots I had laying around. To complete the look, I got my trusty crowbar. Now that we've acquired our hardware, not a single zombie stands a chance against us.