Half Human Half Skeleton
I created a clay sculpture of a face divided into two halves. One side represents a living human, while the other represents a skull.
Supplies
- Clay
- Clay Carver
- Markers
- Styrofoam Head
Starting the Base
So the first thing you need is a styrofoam head and just pure clay. To start off you mainly put white clay on one half and make sure to spread it as much as you can if you don't have much clay. After you put the clay on one half, get your clay carver to make sure it's evenly divided or close to it. Next you want to get a little bit of clay and roll it to make the eyebrow structure around the skull. Make sure to carve the eyes and nose as you're going to need it for later. You could even cut some details to it to make it look worn out or to replicate the look of a skull. Go onto Step 2
Finishing the Base
After you've done that if you only have white clay in which I only had, get some skin tone markers so you could color the clay then mix it up so it can create a natural skin tone color. Once you have finished, put all that colored clay on the other half of the head and spread it out. Once finished, carve out the whole nose. It will be messy but it will do. For this I got a black maker and colored a small piece of clay and sticked the clay on the nose. Spread it out to make sure you can't see the white on the styrofoam. Go onto Step 3
Add Details
Once you do the nose, you will do the same thing for the eye of the skull. So you carve some parts out of the eye to make it look deep. Get a black marker and color the clay. Once done, you place the clay on the eye and spread it, you can color it more if needed. Next you get another piece of clay for the eyebrow for the human side and color it black or whatever color you want it to be. Place it on the head and make sure there's no white spots on it. For the ear you need a piece of clay and for this I tried my best to replicate an actual ear so try to shape it like a ear. Go onto Step 4
Making the Skull
For this part I cut the eye part and put just blank white clay to make the eyeball. At the end Im gonna add the pupil. before I do that I cut part of the top skull so I can add a brain. Once you cut the head of the skull, I cut inside the styrofoam so I can put pink clay that I colored on the top. Once you are done with putting the pink clay. I used the clay carver to make the texture look like an actual brain. Go onto Step 5
Working the Top
I got a bunch of clay and colored it a little so there wouldn't be no white spots peaking. After that, I put it on the head to get a simple haircut so I wouldn't waste that much clay on the hair. Go onto Step 6
Adding Finishing Details
The next step you want to do is color the hair fully. It will take time because you have to color it twice so there wont be any white spots. Go onto Step 7
Final Project
Once you have done everything else its time to add the pupil. For this I got a thin piece of clay and colored it black as I put it on the eyeball. I added a white spark on the eye also. Then you cut a small hole on the nose as well as draw the mouth. And there we go