Grill Quick Restoration

by djpolymath in Cooking > BBQ & Grilling

2808 Views, 21 Favorites, 0 Comments

Grill Quick Restoration

Instead of a full restoration this is a quick clean up to restore functionality and aesthetic appeal.

Grill

Old busted grill.

Photos

Take photos while disassembling.

Grill Base

I used a cutting disc on an angle grinder to remove the grill base.

Iron

Remove the rust from the grill top with a wire brush and an angle grinder cup brush.

Grease Catch

Remove the old grease catch and replace with steal sheet metal.

Legs

Wash, sand and paint the legs.

Body

Remove rust with rust remover and a wire brush. Sand smooth and coat with high heat grill paint. I didn't paint the inside of the grill hood.

Burners

The bolts on the burner base had broken off. I drilled out the bolt and tapped the hole. I then cold welded in new bolts.

Hardware

Soak the hardware in vinegar and brush clean.

Reattach

Reattach all the hardware and replace bolts where necessary.

Burner Cover

I cut the welds on old rusted grill grates and mounted new expanded sheet metal.

Base

Create a base for the grill and propane tank to sit on.

Paint

Paint the base.

Assemble

Fully assemble.

Season

Turn on the burners and heat up the grill for a half hour to burn off any volatiles. Season the inside of the grill.

Grill or Stove

Because there are 60,000 btu burners the top grill can be removed. The burners can be used for stir frying with a wok or cooking in a stock pot.