GoPro 3D Print Zip Tie Mount

by goshrant in Workshop > 3D Printing

3481 Views, 14 Favorites, 0 Comments

GoPro 3D Print Zip Tie Mount

This part modifies an existing GoPro mount to turn it into a multi-functional zip tie mount. 

Unscrew the Bottom

There are three screws on the bottom of the mount. Unscrew all three of these and remove the bottom plate. 

Mount to Printed Part.

After you've printed the part place it on the bottom of the mount. Screw the three screws back in. Tah dah!