Gloving Flower LED

by deepak_e4d in Circuits > LEDs

556 Views, 1 Favorites, 0 Comments

Gloving Flower LED

Maker : Deepak
Location
: Banjaraplya E4D Makerspace

I did this gloving flower LED in Banjaraplya E4D Makers pace.

Material:

  1. LEDs
  2. Wires
  3. paper
  4. Battery holder and battery
  5. Switch

Tools

  1. Electric tape
  2. Solder

Make the Flower

Make the flower has shown in image.

Fix the Wires to Battery

Fix the wires to battery has shown in image.

Put the Switch

Put the switch has shown in image.

Fix the LED

Fix the LEDs to the wires has shown in the image.

Put the LEDs Into Flower

Put the LEDs into the hole in the flower has shown in image.

Finally My Project

Finally my project is finish and it look like this.