Garden Tool Box
Material Used
A Personal Touch
Painting and Engraving
The front panel was given 2 coats of grey primer and 2 coats of blue aerosol paint. As you can see from the picture, it was for a Christmas gift 2015. This engraving was also carried out by the laser engraver I had at my disposal.
Front Panel Assembly
Sides Assembly
Tool Storage Rack
The garden tools were laid out and the distance between each tool handle was measured and transferred to the 3/4 inch plywood strip. This would allow each tool to be placed into its own unique place after use. Holes were drilled and notched for the positioning of each tool. A router was used to make a comfortable home for each tool handle. This was secret screwed to the back panel via two of the handle cut outs.
Protecting the Knees!!
Enjoy Digging!!
The garden tool box was completed with the use of off-cuts of birch plywood and a number of screws and galvanised nails. This Christmas present was accompanied with a lint free cloth and a can of Danish oil. I believe there was 3 coats of Danish oil applied to the Garden Tool Box.