Garage Parking Stop Sign

by aaahotdog in Workshop > Cars

736 Views, 0 Favorites, 0 Comments

Garage Parking Stop Sign

Park your car without worry.

Tools and Materials

1 ten foot piece of 1/2 inch pvc pipe

4- 1/2 inch pvc caps

3- 1/2 inch pvc t's

Pipecutter or hacksaw

pvc cement if you want it

Cutting the Pipe

Cut (6) six inch sections for the base. Build the base according to diagram. The remaining 7 feet of pipe cut as tall as you like 4 or 5 foot should be more than fine.

Mark the Stands Position

I just shot 2 marks of black paint on the concrete where I wanted the back leg caps to sit on. It's too cold now, but in the summer I plan to paint the stand a bright red.

Warning

Will not prevent this however ;)