Flip Flop LED Circuit

by sooraj619 in Circuits > Electronics

75135 Views, 100 Favorites, 0 Comments

Flip Flop LED Circuit

This is a simple circuit based on transistor 2N 2222A and some resistors, there are 2 LED s and when one is on other will be off and this will be repeated in equal intervals of time  

Parts List

2 x  2N2222 transistor

2 x 10k resistor (brown black orange)

2 x 390 ohm resistor( orange white brown)

2 x  100uf electrolytic capacitor

1 x blue LED (or other colors u like)

1 x red LED (or other colors u like)

battery ( 3 - 9v)
 
switch

Circuit Diagram

complete the circuit according to the circuit diagram,here i have used a common circuit board, there is a simple way to find the polarity of the LED ie, by looking for the flat part in the diameter of the LED the leg in that side will be negative 

Conclusion

 use safety scissors to decrease the length of the legs of components, do not use more than 9v which will make the transistor hot and some times burned,use alligator clips while soldering the transistors which will reduce the heat of the transistor thus saving it,comment if u have any doubts