Flat Pack Garage Work Table

by Mike Muldoon in Workshop > Organizing

720 Views, 4 Favorites, 0 Comments

Flat Pack Garage Work Table

Built as part of the "Rockler Desk Challenge", this work space emphasizes flexibility and maximizes use for each element.

Supplies

1/2" Plywood

Wood Dowels

The Concept

A space was needed in the garage to work on projects. The work space needed to be put away "flat" against the wall adjacent to my car. The solution is a series of french cleats and dowels to form a flexible work space.

Construction

The wall unit is made of 2 plywood panels with french cleats on them. One panel is fixed. the other is removed from the wall and is supported with a cleat and by the two "storage towers" that are removed and placed on the floor. The wall unit is now a work table.

Work Space Assembly

When each element is removed, it reveals function beneath. The "table" is removed to reveal more cleats on the wall. The towers are removed to reveal a panel of holes for dowel storage.

The storage boxes in the "towers" are removed and placed on the wall using their own cleats. The function of these boxes is a wide range and their locations are highly flexible based on your current needs.

In Use