Fish Trap

This is what it should look like at the end.

You will need a Drill, some nylon fishing line, a knife, and a sprit, coke, or juice bottle.

First Get a Sprit, Coke, or Juice bottle.

Then cut the top of the bottle around the same spot as I did it.

After cutting the top off the bottle, cut the cap off.

Then put the cone shaped bit inside the bottle near the top and make sure it stays in and doesn't pop out.

Then get around 1-2 meters of string or nylon.

Then drill town holes in to bottle the tie the string or nylon onto.

Then tie the the string or nylon to the bottle with a strong knot then your fish trap is done.