Fingerboard

My goal for this project is to create a fingerboard. A fingerboard is a skateboard that is a lot smaller and you use your fingers to play with instead. I decided to create a fingerboard because I have seen many videos on tiktok where people used a fingerboard and I had found it very interesting and I think many others would find it interesting and fun to play with.

Materials that are needed:

Hard wood

Saw

Wood stick

Cardboard

Cotton ball

Hot glue

Any bendable material

Paint or markers

I first cut out 3 pieces of wood one longer piece and two shorter pieces

Then I use hot glue to connect these pieces together

Then I glue 2 wood small sticks to the bottom of the wooden pieces that I will use as an axle to attach to the wheels

Then I find 2 small plastic wheels and put them onto the wood stick

Then i glue the ends of the wood sticks so that the wheels wouldn’t fall off

I first get a big piece of flat wood

Then I find and cut out some cardboard to recreate the obstacles they have at a skate park

I first create a cardboard ramp I bend the cardboard in half to create a V

Then I glue it to the wood and add a support beam underneath the cardboard using wood to make sure it wouldn’t fall

Then I use a wood stick and put 2 wood platforms on both sides to create a rail

Then I create a big ramp that is shaped like a U

I use a material that is bendable in order to make that U shape

Then I glue it to some cardboard to make sure it stays in that shape

I use clay to make little ghost people

Then I stab sticks in them to show that they are really dead and use some red paint to make it look like there is blood everywhere

Then I use a cotton ball and rip it apart to create a huge web

Then using markers, I add little decorations and details