Eugene 3D Model Shisa

by 2419hjis in Workshop > 3D Printing

490 Views, 1 Favorites, 0 Comments

Eugene 3D Model Shisa

This is how you can make the Shisa in tinkercad

Create Circes

In this step, you will need to create four different circles like the one in the image and align them together like this. Make them tallest to shortest from left to right.

ADD LAYER ON TOP

Copy and paste the circles from step one and align it in the same position. Extend the four circles upwards and move it back until it looks like this.

Add 3 Long Circles

Add three circles on the top of the four circles like this.

Create a Hole Block

Create a hole-square

Create a Hole

Group them and create this

Create Two Hole Blocks

Create two-hole blocks on the side

Group the Circles

Group them

Add Circle

add a circle on top of the foot

Add Long Circle

Add a long circle on top of the foot

COPY PASTE

Copy and paste the leg and rotate it to look like its the back of the foot

Do the Same With the Front Legs

Copy and paste the back legs into the front and make it smaller. You cant to rotate the long circle at the top to face upwards.

ADD Circle

Add a circle in the middle. This will be your bottom torso

Bottom Torso

Add another circle in the bottom torso. This is your upper torso

Add Circle

Create a circle and separate it from the torso it's sort of like an oval.

Add Nose

Add another circle on the face

Add Nostrils

Add two nostrils and make it transparent

Group Them

Group the two circles and create a hole.

Add the Mouth

Add another circle on the bottom of the face

Create an Invisible Circle

Group

Add a Circle

This will be the eye

Add an Invisible Circle

create a hole

Apply to Face

This is the eye

Eyebrows

Add two narrow circles on top of the eyes

Add a Another Narrow Circle Between the Brows

Create Circle With Dent

this will be your ear

Add Ears to Face

Finish It Ip With 7 Circles on the Side of the Face

ADD HEAD TO TORSO