Easy Toe Rings

This tutorial is for two different types of adjustable toe rings. They're so easy that you could just sit around & make them while you watch TV or, right before heading out in your open toe shoes.

You'll need:
About 4" of craft wire
Jewelry pliers (needle nose hardware pliers work too)
A bead (optional)

This is the easiest one

Using the tip of the pliers, bend the end of the wire into a tight loop. One should face up and the other face down (see picture 2.)

Bend each end a couple more times to create the swirl. Make sure one swirl points up and the other points down.

Wrap it around the pliers to shape it

This one is a little more fly :)

Just like last time, bend the end of the wire into a tight loop. But now, put on a bead and let it fall to the end with the loop (see picture 2)

Swirl the wire around the bead.

Swirl the other end of the wire like last time. Only now you're going to make it a bit smaller. Make sure one swirl points up and the other points down.

Wrap it around the pliers to shape it. Slide it off and you're done!

Thanks for checking out my Instructable! If you tried it please share a pic :) Enjoy your toe rings!