Driving Duck: NFC Tag GPS Keychain
by A_Maile in Circuits > Wearables
65 Views, 0 Favorites, 0 Comments
Driving Duck: NFC Tag GPS Keychain
ππ¦ππ¦ππ¦ππ¦ππ¦ππ¦ππ¦ππ¦ππ¦ππ¦ππ¦ππ¦ππ¦ππ¦
The Driving Duck is a keychain with a rotating dial of NFC tags that pair with local iPhone Automations that make jumping in your car and driving off a whole lot faster! I drive to places I am not familiar with for work a lot, and I noticed that I always do the same thing when I get in my car: Open Maps, find my route, and turn on music for the drive. This takes anywhere from 1-4 minutes and is a lot of wasted time that I could be on the road. With this intuitive NFC tag keychain and a phone, it is a tap-and-go situation automating all of those tasks into a single step when your phone senses the tag near it. With the turning dial, the Driving Duck had three modes:
DRIVE - Pulls up music app, sets volume and plays, then pulls up Maps for easy access to type in destination
HOME - Automatically puts in directions to your house then pulls up your music app, adjusts volume and starts playing.
PARK - Gets the most accurate location possible based on GPS, translates it into latitude and longitude coordinates and then feeds them in timestamped with the date and time for easy access to your carβs exact parked location. Especially useful in a very large parking lot, for dense downtown parking, and for locations without a formal address yet (ie. construction site) Simply spin the dial so the mode you use is revealed, tap your iphone to the logo on the tag, and off you go!
ππ¦ππ¦ππ¦ππ¦ππ¦ππ¦ππ¦ππ¦ππ¦ππ¦ππ¦ππ¦ππ¦ππ¦
Supplies
- An iPhone (Sorry android users, this project requires the use of iPhone Automations software, you are welcome to use the CAD and program NFC Tags other ways!!)
- NFC Tags - Link
- 3D Printer (Bambu A1)
- PLA Filament (White) Link
- Keychain
- UV Paint - Link
- White Label Paper
Download and 3D-Print Pieces
I provided both .stl and .step files below!
Assembly Note
Slight design mishap, I had to break the twisting back off of the inside piece, inset it into the back plate and then super glue it back on after paint. For my next iteration I will create something screw-in-able
Paint!
Exactly what it sounds like! I got painting. I ended up using UV curring gel paint because I wanted it to look super glossy, but acrylic paint and modpodge probably would have worked too.
- Sanding piece (x3)
- First coat + cure in 5ish sections bc brush was small
- Second coat + cure "
- Detail colors (black and orange) + cure with a million layers for orange lol)
- Top coat + extra long cure
NFC Tags + Label Stickers!
- After ensuring that each NFC tag works, apply each of them to an indent in the NFC tag spinner.
- Cover each NFC tag with the corresponding automation logo, these can be made using a label maker, sticker paper etc.
Note: My original version had the small rectangular stickers but it ended up sliding more smoothly when I had one large sticker that covered the whole surface of the inside piece.
IPhone Automations Intro
As far as I am aware aware there is no good way to "publish" automations and they have to be created locally on your iPhone in the Shortcuts app. Because there is not a way around this I have provided screenshots of what all of the automations are as well as their labels so it can be duplicated easily!
The only thing not covered in those screenshots was how you pair the NFC tag with the automation. When you click "+" to create a new automation, simply scroll down and click "NFC" and scan to register before continuing on adding the contence of the below screenshots to there respective automations.
Note: Creating some sort of "Test plate" Could be helpful during this stage! (See image above)
DRIVE AUTOMATION π
What it does: Start playing music and pull up your maps app so you can type in your destination
PARKING AUTOMATION π ΏοΈ
What it does: saves your GPS location in latitude and longitude to a note so that you can easily put it into Maps and find your parking spot in a large parking lot, place without an address, or dence downtown area. (pretend dunkin' is my house, I don't want to publish that lol)
HOME AUTOMATION π
What it does: Start a GPS route to your house and play music
Final Assembly
- Re-glue the twisting part and disk of the NFC Tag piece in between the bottom plate and wait to dry
- Once dry, glue the top duck-shaped plate to the bottom plate on the unpainted rims of each.
- Once that is dry, connect the keychain to the keychain holder
- Complete final tests to ensure correct operations, then stand back and admire you work!!!
ππ¦ππ¦ππ¦ππ¦ππ¦ππ¦ππ¦ππ¦ππ¦ππ¦ππ¦ππ¦ππ¦ππ¦