Digital Pet
This is part of a larger project, but is a stand alone thing unto itself. These are digital pets that will play with each other! You start off with an egg that hatches and grows into an adult. There are two types - Water and Land. Each pet will be unique using a number of features and colors, and will have unique names as well.
These use ESP32 MCUs which have Wifi and Bluetooth ability. Using a unique feature called "ESPNOW" these units can easily talk to each other without needing a wifi router, sending short messages between them. This is how they will sense each others presence and communicate.
We have two types currently, TheSquareOne and TheRoundOne. The square one is the standard unit that comes with a case, all it needs is a battery.
TheRoundOne requires a 3d printed case, some screws and the battery.
We like the round one the best. But the square one is easier to put together.
Supplies
TheRoundOne
M1.7*6mm screws (4)
M2*3mm screw (3)
3d printed case
ESP32-S3 1.46" round Development Board (TheRoundOne) (https://www.waveshare.com/esp32-s3-touch-lcd-1.46b.htm?sku=29564)
1000mah Lion battery with the smaller jst connector
TheSquareOne
ESP32-S3 1.54" Development Board (TheSquareOne) (https://www.waveshare.com/esp32-s3-lcd-1.54.htm)
1000mah Lion battery with the smaller jst connector
Downloads
The Square One
For the square one, the simplest option is "the square one", which is just an ESP-32 S3 1.54" development board, which includes a square case. All you need to do is add a battery (which you can buy with one included). Assembly is simple, just attach the jst connector (make sure you get the smaller sized one) and screw the case back together.
The Round One
For the round one, assembly is a little more involved. First you need the 3D printed case. I used my Bambu Lab A1 with white PLA filament.
Attach your battery to the board. You need to make sure to get a battery with the smaller type of jst connector.
Then, lay the board inside the top part of the case, noting which side the buttons are on so they line up with the holes. Place the button extenders in the holes and line up with the tiny black buttons on the board. I used tweezers to do this.
Next, line up the spacer holes and screw in the three smaller screws. Make sure the battery wires feed through the cutout.
Place the battery on top of the spacer, and then attach the back of the case and screw in with the four longer screws.
Downloads
Upload Firmware
The firmware for this is written using PlatformIO in VS-Code. You will need those installed in order to compile and upload this firmware.
Here is the repo: https://github.com/Cherry-Blossom-Development/dijatile.
Make sure you select the right build for either TheRoundOne or TheSqareOne.
Play
Have fun with your pets. Of course you will want to make two of them so they can play, but, you can have just one. Just make sure to play with it, feed it, and clean up after it.