Desk Top Pool Table

This project is a mini pool table which I thought of because I enjoy playing pool but I don't have a table. This game is small enough to fit in a bag but big enough to enjoy with a friend. This project took about a week to design and then it was printed on the weekend. The pool sticks are made out of pencils that I carved down into the shape of the stick. The pool balls are made of marbles that are 0.5 inches in diameter. There are 7 marbles 3 with stripes and 3 are solids and then 1 eight ball with an addition to one white ball. I used little foam squares and shaped them into a circle to make a felt for the bottom of the table legs so it doesn't slide around the table. I also put little foam slices at the bottom of the hole to stop the balls from rolling around once it goes in.

i used 3d printed rope to create the table itself. then i used carved pencils to make the sticks. and finally i used half inch marbles and painted them to match the pool balls.

this is the first step to printing. laying out the foundation and constructing length and width.

next step is creating the base of the table without the detail (the wooden frame)

final step was printing on the green to represent the green felt on pool tables.

this was the step of actually having it printed and removing all the excess plastic that was trapped.

this was one of my final steps and it included the making of the pool sticks and constructing them.