DIY Smartphone Video Rig

by SoarPix in Design > Photography

2694 Views, 10 Favorites, 0 Comments

DIY Smartphone Video Rig

In this video I'm showing how to make a DIY Smartphone/iPhone Video Rig.

On this Rig you can mount your microphone and other accessories and this will also help you to film more stabilized.

Part list:

Aluminum Flat Bar

Cut to two pieces of the aluminum flatbar. L=260mm

Drill one 6,5 mm hole in each end and one hole in the middle.

Round the Edges With a File.

Paint the Flat Bars and Let Them Dry

Nut in Nut

Put the M6 nut in the M12 nut and hitt is with a hammer or press it with a vise.

Cut the Threaded Rod

Cut two pieces of the M6 threaded rod about 20 mm longer than the bicycle grips and screw on the M6 / M12 nuts, one at each end, to match the length of the grips.

Put on the Grip

Attach the Flat Bars to the Grips

Attach the Phone Holder With the 1/4" Screw

Attach the Microphone Holder With 1/4 "screw

Attach the Phone and Microphone

Finished