DIY Smartphone Notification Lamp

by balsuryana in Circuits > LEDs

33839 Views, 265 Favorites, 0 Comments

DIY Smartphone Notification Lamp

Introduction


So many gadgets for your smartphone, but it's not cheap for you buy it. So now i will show you how to make unique gadget for your smartphone for cheap and under 30 minutes to make it. I will make Smartphone notification lamp because its so useful when i have new notification or any new message and this gadgets can use as flashlight.

Let's Make It!!

Tools and Materials You Will Need

Materials:

  • Old audio jacks (Use 3.5 mm jack)
  • 1 Low voltage LED (Use the low voltage led for best result)

Tool:

  • Soldering iron
  • Hot glue gun / any glue for make the case

Open the Case

Take the audio jack and open the case slowly, Don't broken the inside.

Search the Output Voltage

  • Take your smartphone
  • Plug in the audio jack
  • Listen any music on your smartphone and set the volume full.
  • Paste the led and search the positive and negative output
  • And its look like image 4 and 5

Solder It!

Take your soldering iron and solder it slowly. After that its look like image.

Make the Case

Make the case for looking best. I use hot glue to make the case like image.But you can use anything for make the case. And cover it using heat shrink tubing or anything. I use white tape to cover it.

Finish

  • Plug in this gadget to your smartphone
  • Set the audio volume on your smartphone full
  • And if you get new Notification or new message, the led will on
  • To see how it works, watch the video

Thanks

All finish, I hope you enjoy this. Don't forget to like, subscribe, and vote me :)

Sorry for my bad english.

Thanks