DIY Ligthbox / Light Table

by simplerandom in Workshop > Woodworking

5635 Views, 71 Favorites, 0 Comments

DIY Ligthbox / Light Table

Simple lightbox/ lighttable

Material List

  • 11mm plywood
  • Organic glass
  • LED stripe (battery powered) with remote

Cut Sides

Cut box sides to 11cm x 40cm size.

To do 45degree bevel cuts, used 45degree router bit (was quicker that adjust saw blade)

Some More Cutting

Cut gap for organic glass and for bottom.

Cut organic glass to match.

Cut bottom.

Routed hole for battery cover.

Soldering

Cut LED stripe to size, glued and soldered then

Gluing, Sanding, Painting

Used painers tape to hold parts together - for easier gluing.

Then sanding and covering with oil.

Video