DIY Garden Gate
This is a tutorial on how I made two Garden Gates using Wood and Steel angle iron.
Materials Needed
Duration : +- 4 Hours
Materials Needed:
10 x 3000mm x 114mm ( 10 ft x 0.375 ft ) Pine planks
12 m ( 40 ft ) angle iron
60 Self drilling screws
2 Hinges
1 Gate Lock
Tools needed:
Circular Saw
Drill
Combination Square
Cutting
Mark your wood where you want to cut it. I used the frame as a guide as it wasn't an exact length.
Fitting
Fit the planks you just cut into the frame and start screwing them to the frame with the tek screws
Hinges
Mark area where hinges will be and screw hinges into place
Lock
Choose where you want to put the lock adn mark the holes.
Drill holes for the lock and fasten it with the bolts that came with the lock
That's It!
The gate is done. Now just hang it and you have made a Rustic looking garden gate in under 4 hours.