DIY Arduino Nano

by Alexan24 in Circuits > Arduino

7825 Views, 53 Favorites, 0 Comments

DIY Arduino Nano

How to make an Arduino Nano with a Attiny 85.

PCB

Shape your design to the PCB. I used 6cm by 2 cm.

Cut the PCB

I used Dremel but you can use whatever you want. Make sure to rub it well, so it will take a good shape

.

Parts

See the parts in the image!

Solder the Socket and the Power Suply

Finish Soldering

Solder power to the Attiny and the pins however you like.

Finish Soldering Part 2

Solder the 3rd Capacitor Between Reset and Ground(on you diy arduino)

Finished!!!

You can see how my turned out. Hope you like it and enjoy it. See at videos how to program it.See the fotos for more info.