DIY Arduino Color Sensor

by Alexan24 in Circuits > Arduino

10654 Views, 45 Favorites, 0 Comments

DIY Arduino Color Sensor

How to make a DIY Arduino Color Sensor

Parts

4 Leds (Green,Blue,Red,Yellow)

4 220ohm resistor

1 LDR

1 10k resistor

Female Pins

PCB

Cut the PCB

Shape your design to the PCB. Then cut it. I used 3.5cm by 2.5cm

Start Soldering Part 1

Start Soldering the Leds like the schematic.

Soldering Part 2

Solder the LDR with the 10k resistor and the Pins like the schematic.

Connect It and Upload the Code

Connect the Pins like the Schematic and Upload the Code.

Downloads

Done!!!

After you have Upload the code, see how your DIY sensor finds the colours.If a colour matches,the led colour will flash 3 times.Hope you enjoy!!