DC Motor Educational Practice Learning Kit

by ICStation in Circuits > Electronics

77 Views, 0 Favorites, 0 Comments

DC Motor Educational Practice Learning Kit

Introduction:

This is a simple permanent magnet DC motor model to demonstrate the DC electric motor working principle.

It will rotate like a real electric motor ideal for school scientific projects or physics teaching.

Parameter:

Model:J24018

Working voltage:DC 3.0V-6.0V;

Usage: Study magnetic lines of force;

Magnet size:22*20*20mm(0.86*0.79*0.79 inch);

Magnetic flux density:>=72mT;

​Install Magnet Bracket on the Plastic Seat

Install 1pc Rotor Bracket at First

Install Another Rotor Bracket and Rotor/commutator/armature Coil

Install another rotor bracket and rotor/commutator/armature coil and fixed by M3 screw and M3 nut.

Install Pulley on the Rotor.

Bend the Angle of the Electric Brush

Install Electric Brush and Fixed by M3 Screw and M3 Nut.

Install Red+Black Terminal

Install Permanent Magnet.

Connect to the Cable on the Terminal

When you finish the motor assembly, please turn the rotor bracket to let the gap middle between the 2 brushes.

And then connect to the cable on the terminal and then connect it to DC 3.0V-6.0V power to do a test.

Please Note:
1. To avoid the short circuit, two electric brushes never touch the commutator segment.

2. Its working voltage is DC 3.0V-6.0V.

This DC magnet kit can be ordered from ICStation below $10. There will be some promotion on every Wednesday, sometimes it will be lower to $7 .

Thank you for your support of ICStation!