Cutesy Creation

by gchavez7881 in Design > 3D Design

23 Views, 0 Favorites, 0 Comments

Cutesy Creation

Welcome to my instructable, I am going to show you how to make a cutesy panda on a 3D CAD software that is able to be 3D printed.

Supplies

You need a computer, a CAD software, filament, and the 3D printer to print your part.

Body Sketch and Revolve

Make a sketch on the front plane to revolve as your panda's body. Then, revolve your sketch and make the vertical line on origin, your line of axis.


Head Sketch and Revolve

Make a sketch on your front plane to revolve as your panda's head. Then, revolve your sketch and use the line vertical of the origin as your line of axis.



Fillet

Fillet where your panda’s body and head connect to create more strength by 0.10 in.

Ears

Make a sketch on the right plane and draw a half circle at the tip of the head. After you make your sketch, revolve it using the horizontal line at the bottom of your sketch. Then, make a sketch on the front plane to use to cut your ear to your desired shape. Lastly, Extrude Cut your sketch through all.

Arms

Create a sketch on the front plane and draw two circles on the body as your arms, then extrude them by 1.50in. When you do that and have the base for your arms, fillet the back of the cylinder by 0.10in to create strength. Then, you'll also fillet the edges of where the arms meet the body and the edge of the side on the cylinder furthest from the body by 0.10in.

Hand Paws

Create a sketch on the surface of the arms as paws, then extrude the sketch by 0.10in away from the body. Fillet the edges of every shape on the paw by 0.01in. Once you have your paw, mirror the paw over Right plane.

Leg Sketch and Revolve

Create a plane 0.85in distance from the Right Plane, then create a sketch on the plane you made to revolve as the leg. Revolve the sketch using the horizontal line as the line of axis.

Leg Paws

Create a sketch on the surface of the leg to extrude and paws, make it to your desired size and shape. Then, extrude the sketch by 0.40in.

Make Paw Extrude Shorter

Create a sketch on the Top Plane and make a rectangle and the edge of the paw surface to Cut. Then, Extrude Cut the rectangle upwards until it cuts through the paw.

Center of Paw

Create a sketch on the surface of the leg paw and sketch a center of a paw to your desired shape, then extrude by 0.15in.

Rounding Paws

Fillet the edges of the first sketch of your paw (the ovals) by 0.10in, then fillet the edges of the center of your paw by 0.05in.

Mirror Leg

Mirror your leg, along with all features used to create the paw.

Cutting to Make Your Panda Stand

Create a sketch on the right plane and make a rectangle with the top line of the rectangle co-linear to the bottom line making the surface of your body. Then, cut extrude all the way, and now your panda stands.

Black Fur Shape Around Eyes

Create a sketch on the Front Plane and make ovals, or a more detailed shaped to be as your black fur around a panda's eyes. Create a new plane and make it 3in from the top plane upwards. When, you make the new plane, create a sketch on it to cut your extrude shorter. Then, cut extrude it through all upwards that way you don't cut through your arms. Then, make a sketch on the Right Plane and make a sketch slightly offseted from the edge of the head to evenly cut it. After you create your sketch, revolve it by 70 deg in the direction of the ear on its side. Lastly, just mirror the cut revolve.

Eyes

Create a sketch on the front plane and draw 2 circles as your eyes, then extrude them by 1.40in. To make them evenly shorter around the head, make a sketch on your Front Plane to cut revolve. In the sketch, offset the edges of the head by 0.10in and close it away from the head as if it were a rectangle, then cut revolve. Then, you repeat this process for the pupils and other details you'd like to add, but offset edges slightly higher per cut revolve that way your features are distinct and not together.

Snout

Create a sketch on your front plane as your desired snout and extrude it out by 1.35, then repeat the step of revolving a cut to make your snout shorter.

Cutting and Filleting Ears

Make a sketch on the surface of the ears, then extrude it through 0.35in. When you do that, fillet any harsh edges or curved corners.

Color

Color your panda however you'd like best, then you're ready to 3D print!