Cute Rooster

Welcome to my instructable. Today I am going to be showing you how to create a cute rooster with eggs that is full defined and is step by step.

3D printer

I drew only half of the body of the rooster, and closed up the drawing. If you only draw half the body it will revolve the right way. So draw only half of it, fully define it by dimensioning it and revolve it all around.

Then draw the legs on the bottom of the rooster but make sure, looking at it from the front point of view it is touching the bottom face of the body, do the legs on the front plane, then extrude it frontwards, using the dimensions shown. Extruding it 0.10 inches.

I drew the rooster's feet on the bottom face of the leg, defining it with the dimensions provided and extruded it outwards. Extruding it 0.10 inches.

I then drew the arms where I used the front plane, I drew only one arm and placed the dimensions on the only arm I made, after putting a center line in the middle. I mirrored it on the other side of the center line. After just extrude both of the arms. Extruding it 0.10 inches.

In this step I drew the nose, I just drew a triangle on the right plane, placed the dimensions, and revolved it all around, make sure you leave space on top for the eyes.

I drew the comb on the rooster's head, I drew it on the right plane, but I drew some of the comb in the head of the rooster for it can look like it is actually attached on the rooster. Put the dimensions as shown on the photo and extrude it forward on the right plane. Extruded it 0.10 inches.

I drew the eyes with the dimensions provided, with the Ellipse tool, which is like a oval shape, on the front plane which put the drawing in the middle of the part facing forward. So then I extruded cut only forwards through all.

I drew the outline of the mouth on the front plane, placed the provided dimensions and extruded it forwards. Extruded it 0.71 inches.

I added some eggs below the rooster like he popped them out. Do it on the front plane. Do these dimensions that are listed use them for every egg, they are all the same size. And place them like how it is provided.

I colored the rooster to its color. Using red for the comb, orange for the nose, and dark orange on the mouth. And black for the inside of the eyes, white for the whole body and eggs.