Cool Badminton Shuttle -- Shuttlecock

by Louis sMarty in Workshop > 3D Printing

674 Views, 0 Favorites, 0 Comments

Cool Badminton Shuttle -- Shuttlecock

Have you ever searched a Shuttle or wanted one? This is the sign, that you need one... It works well :)

School: Liechtensteinisches Gymnasium, Europe

Supplies

Some random Tape, (TPU filament for the top), PLA for the rest

Print

Place the Objects in your Printer software and put them on your disk. TIPP: Use Tree supports

Print the Files. It should take about 8,30 hours.

When you have some TPU, use it for the head of the Shuttle.

Printing Temp: PLA: 200°C, 50°C; Max infill 10%

Clean It Up

Remove the Supports carefully, that you don't damage the product. It's best to use a file and pliers.

Complete the Shuttle

Put the Components together add some glue and glue it together (if they don't fit you have to file, that it fit's with a little bit of pressure). Last but not least add some Tape if you want.

Well Done! Now your Shuttle is ready for your first match ;) Have fun with it!!!

It would be friendly to leave a like and give a I did it ;)