Control LED Brightness With Remote and Arduino
by DivasG in Circuits > Arduino
12373 Views, 12 Favorites, 0 Comments
Control LED Brightness With Remote and Arduino
We will make a Remote Control LED brightness controller, it is very simple. Comment below your question if you have any, I will love to answer them all. My blog for Latest Tech News and Some Projects Electronics Time.
Things You Need
- Arduino
- IR sensor
- LED
- Any Remote Control
- Battery
- Battery clip
- Arduino Power Cord
- Bread board
- Some connecting Wires
Circuit Daigram
Simply Hooking up IR receive pin to pin 11 and other two pins of IR Sensor to 5V Supply and Ground of arduino. Connect LED to pin 9 and Ground.
Code
Simply run the code in your Arduino IDE and see the beautiful project i action. But, first check your remote control signal by using the IR library on Github. FYI the IR library runs on Arduino IDE 1.0.5 so, if you have arduino IDE version 1.0.6 then downgrade it to 1.0.5 after saving your projects to other place in your PC. Link For Previous versions of IDE.
Downloads
Video Tutorial.
Subscribe to my blog Electronics Time for latest projects and TECH news. Hope you Enjoy the project.