Color Projector

This is how you make a colored lamp from household materials

wires
Cardboard
Two AAbateries
Small Light
Aluminum foil
Colored transparent plastic
Electrical tape
Tape

First you will want to use the electrical tape to tape the positive and negative ends of two AA batteries together

What you need to do is take your small light and attach 2 wires on the positive and negative ends

To create the button you will first grab a piece of cardboard twice the length of the desired length of the button, fold the cardboard in half and tape aluminum foil to the 2 sides that touch, make sure that the aluminium foil touch each other when you push down on the top part of cardboard.

Connect the negative wire to the bottom aluminum foil and a third wire to the top piece of aluminum foil

Tape the third wire to the negative end of the battery and the positive wire (white) to the positive end of the battery

Tape transparent colored plastic over the light and it will shine that color so you can make a colored lamp