Clanck

by Luigi M in Workshop > 3D Printing

439 Views, 0 Favorites, 0 Comments

Clanck

Hello, we are Luigi y Lautaro. We are 13 years old.

We are from the vinciU institute. Luigi and I ( Lautaro ) made a Clanck.

Clank is a character from the video game series Ratchet and Clanck. Clanck is a robot that made company to Ratchet in the series. They fight with villains to save the galaxy planets.

Supplies

For this project we are going to use a PC and Tinkercad.

Project developed within the 3d modeling classes of the axolote commission in VinciU

Feet

Put a half sphere in the work plane. Remember to change the color to gray before continue.

Put a rounded box, change the color to black and center the two figures.

Chest

Put a cylinder and a sphere. Then, create another cylinder and put it in the sphere.

Grids

Create a box and change the radius. Later, make another box and duplicate it and make one a hole, and put it in the first box.

Create a wedge and duplicate 4 times.

Arms

Create a sphere and a cylinder to make the arms.

Hands

Put a box, change the radius, duplicate it and make the hands.

Head

Put 2 half spheres and make one a hole.

Put a sphere in the half sphere.

Make a sphere,duplicate it a hole and put it in the head.

Put a cylinder and a half sphere.

Put 2 half sphere in the workplane. place another 2 half sphere in the workplane and change the color of 2 half sphere to green and the another to black.

Put a paraboloid an a sphere.

End

Finally we got the Clanck. This Clanck it's so cute and beautiful. Clanck represent a challenge for Luigi and I.