Chisel Rack

by rbclima in Workshop > Organizing

4377 Views, 39 Favorites, 0 Comments

Chisel Rack

Here is my Chisel Holder! It's great for organizing your workshop.

Tools needed:

  • Drill press
  • 22mm drill bit
  • 12mm drill bit
  • Sander
  • Saw

Materials:

  • Piece of wood 52cm x 5cm x 3cm
  • Two 8cm screws

Marking Holes

Mark the holes with 4cm apart

Drilling Holes

Drill the holes. Start with the 22mm drill, then finish with the 12mm

Cutting the Slot

Cut the vertical slots with the wood saw

Finished!

Hang it on the wall and put your chisels!