Chair Design

by Lauradasilva in Design > 3D Design

160 Views, 0 Favorites, 0 Comments

Chair Design

I did the chair because I wanted to copy the chairs of my high school. I thought It will be very interesting to see the small version of it.



Downloads

Supplies

  • HAND SKETCH ON PAPER 
  • PENCIL
  • TINKERCAD 
  • 3D PRINTER


Planning

First I sketched the different parts of the chair, then I corralled it all together to see what it was going to look like.

:CHAIR CHAIR BACK

then I opened Tinkercad and picked a curved shape and put two nails in the middle.

BACK HOLDER

Then I picketed another curved shape and another two columns and put them together.


SEATING

I picked a circular shape and then I cut it to be the shape that I wanted to be.

BUTTON HOLDER

I got two other columns and I stuck them at the bottom of the chair seat. Then I connected the top column with the bottom one.

WHEEL SUPPORT

 Then I got a X shape and put four balls at the bottom of each ending 

LEVER

Then I got another column and put it sideways to make the Lever and then I connected the X with the button of the Chair seat

CHAIR MODEL

 Then I just grouped all together.  After that I turned it into an STL file to send to the 3D printer.

3D PRINTER

Then I printed on the 3D printer,and put it in a support cleaning apparatus to remove the support material.

BIG AND SMALL

Then I put the mini chair on top of the normal sized chair to see the difference in sizes.