Chainmail

by TheMRCOOLman in Circuits > Art

1858 Views, 10 Favorites, 0 Comments

Chainmail

Prepping

You will need lots of pop tabs. Get as many as you can depending on the project and what you use it for. You will also need tin snips, a pare of pliers, and a sheet of paper (for transporting your creation.)

Preparing

Take your tin snips and cut a slit in the large part of the pop tab. Next take your pliers and bend the pop tab on a 45 degree angle. Make sure you do it on the correct side. see the picture. Prep all of your pop tabs now because it will save you time.

Assembly

Take three pop tabs and attach 1 of then to the two next to each other. This is really confusing so just look at pictures and If you have any questions ask in the comments.

Add On

Make a group of 4 and then you can add on. DON'T MAJE ANOTHER SEPERATE GROUP OF 4 Look at your piece and were ever you see a diamond you could make add it on

Transporting

Use your sheet of paper and slide your chain mail on it to prevent tangling