Center Finder Jig

by djpolymath in Workshop > Woodworking

9594 Views, 144 Favorites, 0 Comments

Center Finder Jig

Simple center finder.

MDF

Cut two pieces of MDF.

Glue

Glue and clamp them at a right angle.

Screw

Reinforce the joint with screws and check for square.

Angle

Cut a right angled triangle piece of MDF.

Glue

Glue and clamp in place.

Pivot Screw

Before the glue dries insert one screw to reinforce and to pivot. Check the 45 degree angle and adjust appropriately, then insert a second screw.

Seal

Seal the edges of the MDF with glue and give the piece a coat of shellac to prevent moisture from warping the shape.

Find the Center