Cat Condo (DIY)

by Nathalie Garza in Craft > Cardboard

606 Views, 4 Favorites, 0 Comments

Cat Condo (DIY)

The cat condo is a homemade feline bed that is made from recycled materials. Its main structure comes from a cardboard box, which is a favorite item for most cats. It provides the perfect place for your feline to take naps in throughout the day. 

Supplies

  • 2 wire hangers
  • Pliers 
  • Duct tape
  • Circular object (ex: bowl)
  • Scissors 
  • Ruler
  • Marker
  • Cat bedding 
  • Safety pins
  • 4XL T-Shirt
  • Cardboard box (16 ½ x 18 ½ inches)

Cut a Hole on One Side of the Cardboard Box

Use the scissors to cut the box. You can prepare the box to your liking. I cut off the flaps of the box to make later steps easier.

Reinforce the Box

Reinforce certain areas of the box, you find flimsy, with duct tape. 

Cut the Hangers

Use the pliers to cut the hooks off the wire hangers.

Bend the Wires

Bend both wires into a trapezoid shape.

Build the Roof of the Condo

Poke a hole, with the wire, on an inside corner of the box, four inches down from the edge. Repeat this action on the opposite corner. 

Finish the Roof

Grab the second wire and repeat the process in step 5. 

Bind the Wires

Use duct tape to bind the wires to each other at the center. It should make a 'X' shape as shown in figure 15.

Put the Shirt Over the Box

Pull the shirt over the box and place the head hole over the hole that was cut out in step one.

Secure the Excess Pieces of the Shirt

Use safety pins, indicated by the white circles, to fasten loose ends of the shirt against the box.

Place Cat Bedding

Place cat bedding inside the box. I overlapped the cat bedding to ensure the entire bottom was covered.