Cardboard Christmas Tree
With a bit of skill and some time, you can assemble a Big Christmas Tree out of recycled cardboard by repurposing shipping packaging. You don’t need large sheets of cardboard, just a hot glue gun, a utility knife, and packing tape.
Supplies
- Used and disassembled cardboard boxes from online purchases.
- A utility knife.
- Packing tape.
- Twine or cord.
- A marker.
- Hot glue gun.
- Pack of hot glue sticks.
- Roll of kraft paper.
- Christmas decorations.
Assemble the Cardboard Sheets
First, you must determine the height and width of the base of the octagonal pyramid that will serve as the tree's structure. Like we are using an octagonal pyramid, you will need 8 triangles.
In the example shown in the photos, each triangle of the octagonal pyramid has a height of 180 cm and a base of 27 cm, resulting in a Christmas tree with a base width of 70 cm. You can adjust the dimensions to suit the space you have available by making the triangles smaller or larger. Keep in mind the size of your doorways if you are building it in a room other than the one where it will ultimately be placed.
Using these measurements—height (180 cm) and base width (27 cm)—for each of the triangles that will form the pyramid, you can begin building the structure.
Lay the cardboard pieces on the floor and join them together using "staples" made from scraps of cardboard, securing them in place with hot glue.
You will need 8 triangles; therefore, prepare 8 rectangular pieces of cardboard, each 27 cm wide by 180 cm high.
Cut Out the Triangles
We take the cord and use it to outline the triangle so that it can be colored in with the marker.
After marking the lines, cut out the triangles using a utility knife.
It doesn’t have to be perfect.
Assemble the Pyramid
We join the triangles using packing tape, assembling two sections—each consisting of four triangles—to make the process easier. We then connect one of the two sides before turning the structure over, ensuring that the side with the packing tape ends up on the inside of the pyramid. Finally, we close the pyramid using more packing tape.
Secure the Structure
To secure the structure, cut out two circles to be inserted inside the pyramid: a smaller one for the top section and a larger one for the middle section.
You can estimate the sizes; in this case, they are approximately 50 cm and 40 cm. Add tabs to each circle so they can be glued to the inside of the pyramid. This will prevent the octagonal pyramid from becoming misshapen and ensure the Christmas tree remains stable. Hot glue is the fastest way to attach the discs, though you could also use packing tape.
And yes, you have to go inside to stick the circles on.
Roll Up the Kraft Paper
To wrap the kraft paper, it is best to cut long strips and crumple them up. You can attach the first strip to the top of the tree by inserting the paper into the opening at the very top. Then, use packing tape to secure each section of the paper in place. You can tuck the next strip underneath the first one—and continue this process all the way to the bottom.
Decoration
All that remains is to place the Christmas tree in its final spot, light it up, and decorate it to your liking. We used green Christmas baubles, ribbons, and we also made paper snowflakes and stars —using the art of paper folding— which we attached with tiny wooden clips.
The best part is that, once Christmas is over, you can take it apart, fold it up, and store it away, in case you want to make use of it for more than a year. You just need to remove the decoration, collect and store the kraft paper, take out the cardboard discs from the inside, and fold up the structure.