Candy Quest

by Sardines in Circuits > Wearables

62 Views, 0 Favorites, 0 Comments

Candy Quest

We created an innovative wristband paired with a user-friendly app to encourage children to enjoy trick-or-treating and outdoor activities. The wristband allows for screenless interaction, enabling kids to scan NFC tags placed by participating homeowners. The app features engaging gameplay with a roulette system, where children can collect virtual items and trade with friends. Homeowners are invited to join the fun by placing NFC tags around their properties, enhancing the community spirit during the festive season.

Supplies

Materials:

  1. PN532
  2. Lipo Battery 3.7V
  3. DC convertor
  4. charger module
  5. ESP32 C3
  6. M-F wires
  7. M-M wires
  8. On/Off Switch
  9. NFC stickers/tags
  10. solder
  11. electrical tape
  12. wristbands 20mm
  13. Filament

Softwares:

  1. Fusion360
  2. Arduino
  3. VS Code
  4. Firebase

Connecting Battery & Switch

  1. Connect the red wire of the LiPo to the red wire of the switch (it can be soldered or using electrical tape)
  2. The black wire of the battery connects to the charger module B- (solder directly or use another thicker wire and solder/electrical tape that to the thin wire of the battery then solder the thicker wire to the charger module, what I did because the thin wire of the battery can be easily disconnected)
  3. Connect the black wire of the switch to B+ on the charger module. (solder)

Connecting Charger Module & DC Convertor

  1. Connect a wire (ground) (can be any color, just make sure to color code which makes it easier) from VN- on convertor to OUT- in charger module. (solder)
  2. Connect power (red) from OUT+ to VN+on charger module.

Lil Final Touches

Can use electrical tape to cover some exposed wire parts if not soldered enough.

Wiring

Follow the diagram for connecting the M- F wires or M-M wires.

Connect the other side of the NFC module to the DC converter +Vin and -Vin.

(don't worry about the resistor)

( click to zoom)

Make a CAD Model

Ours is a box but you can design however you like.

Downloads

Setting Up the App Video

It can be found in GitHub.

Set up the app on iPhone or Android.

Connect the wristband through the app.

https://youtu.be/DSeToaC2u9Q?si=9Qiv927DLhh5ZkVz