CNC Pyrograph "WoodBurner"

by 4arus in Workshop > CNC

2399 Views, 16 Favorites, 0 Comments

CNC Pyrograph "WoodBurner"

I'm from Russia. I don't speak English. I use a translator. Please forgive me for future mistakes.

This is a CNC machine that burns out paintings with heated nichrome wire.

We Will Need

1). Нам нужны шаговые двигатели - 2 предмета в принтерах, банкоматах (просто не стоит взламывать рабочий банкомат )) Напишу только тип двигателя NEMA17 HS4401 HS8401 и другие аналоги.

2). полированные валы диаметром 8 мм и длиной 500 мм-две штуки и одна 600 мм.

3). 4 подшипника LM8UU или 2-LM8LUU

4). два шкива класса GT2-20 зубьев для внутреннего диаметра 5 мм и один для 40 внутренних диаметров 8 мм все под поясом класса GT2 6 мм

5). 4 фланцевых подшипника F624ZZ (4x13x5mm), 2 подшипника 688 (8x16x5mm)

6). один метр длиной продетые нитку стержни M6-M8 и M12 два

7). от электроники: arduino + щит и драйверы 2шт + перемычки 6шт

8). Клеммная колодка. Кусок текстолита 55х30 мм толщиной 8-10мм

9). два метра гибкой медной проволоки сечением 2-3мм2
10). Хороший ШИМ-контроллер

11).Блок питания 12В 15-20а, пользуюсь от компьютера.

12). Ремень GT2-1,5 м, кольцевой ремень 158 мм

13). металлическая линейка 1 метр

14). различные винты, гайки

Printing Details

Download the models and print them on a 3D printer

1-1 need 2 pcs.
1-2 - 4 pieces 1-3-3 pieces printing with at least 40% filling with 0.2 - 0.25 nozzle PLA Plastic ______________________________________________

ST-1 - 1 pc. ST-2 - 1 pc. printing with a nozzle up to 0.5 mm filling not less than 25% ABS, PLA, PETG plastic ______________________________________________

L+R - 1 piece filling from 40% SHD - 1 piece filling from 75% ABS, PLA, PETG plastic

Module for Burning Out

We cut out the blank from the textolite as shown in the picture. Fasten the two terminals. Insert the bearings.

Collecting Details

I think it will be clear here.

Assembling the Machine

Here it will be clear how to collect

Some Videos and Photos

That's All for Today.

Next, we will assemble the electrical part. If you are interested, subscribe to me. ;)