CH224K Module Type-C Interface Fast Charging Decoy Supports USB PD3.0 Adjustable Output 5/9/12/15/20V

by zhougaozhougaozhougao in Circuits > Audio

38 Views, 0 Favorites, 0 Comments

CH224K Module Type-C Interface Fast Charging Decoy Supports USB PD3.0 Adjustable Output 5/9/12/15/20V

1. The product supports USB PD3.0 fast charging protocol power receiving chip, with a maximum power output of 100W.

​ ​2. It can provide the required voltage for routers, lamps, and other devices, or provide flexible fast charging power support for special scenarios. Optional voltages include 5V, 9V, 12V, 15V, and 20V. Your charger must support the trigger voltage. ​

​3. USB Type-C PD, supports reversible insertion detection and automatic switching. ​ ​

4. Voltage adjustment method: Adjust the DIP switch according to the table to control the voltage output. ​

​5. After adjusting the DIP switch, since there is no voltage indicator light, it is recommended to use a multimeter to measure the voltage before connecting it to the application circuit.

Please Watch the Video.

The product's functionality was tested using two types of chargers: a laptop charger and a fast charger for mobile phones.

Instructions for Use

The output voltage can be adjusted via DIP switches.

Manufacturing and Purchasing Components

1. Design the PCB based on the schematic and purchase the necessary components.

2. The Type-C connector has 16 pins; exercise caution during soldering, as the tight pin spacing makes accidental solder bridges (shorts) likely.

3. If you prefer not to build this yourself, the product is available for purchase on this website for $2.90 (excluding shipping).