CAD a D10

by theengr in Workshop > 3D Printing

692 Views, 0 Favorites, 0 Comments

CAD a D10

The goal of this instructable is to CAD a D10 with only 1 parameter


Link to my object

Supplies

CAD Software, I use OnShape as it is free

Make a D12

  1. Follow these instructions to make a D12 as the base of the D10
  2. https://www.instructables.com/CAD-a-D12/

Find the Top and Bottom Points

  1. Open a Sketch in the Right plane
  2. Draw sketch lines that go from the edge points to the Front plane
  3. Do this on the top and the bottom
  4. Make the sketch lines parallel to the sides they are extending

Loft to the Top and Bottom

  1. Loft the top pentagon to the top point you found in the last step
  2. Loft the bottom pentagon to the bottom point you found in the last step

Boolean Merge

Finish

You now have a "blank" D10!


Feel free to add numbers to it or whatever else you want!