Butterfly CPX

by mmcmeekin in Workshop > 3D Printing

149 Views, 2 Favorites, 0 Comments

Butterfly CPX

We made a butterfly that is on top of a lit up CPX board. The purpose of this is to spin and flash different patterns of light.

Supplies

-CPX 3-D printed base/holder

-3-D printed butterfly

-servo motor

-cpx board with wire to connect to computer

-battery

-wires

Print

Print 3-D butterfly and CPX holders.

Code

Create the code to allow the CPX board to light up with specific patterns and functions. Use python for this step.


from adafruit_circuitplayground import cp

# SPDX-FileCopyrightText: 2019 Anne Barela for Adafruit Industries

#

# SPDX-License-Identifier: MIT

"""CircuitPython Essentials Servo continuous rotation servo example"""

import time

import board

import pwmio

from adafruit_motor import servo

# create a PWMOut object on Pin A2.

pwm = pwmio.PWMOut(board.A2, frequency=50)

# Create a servo object, my_servo.

my_servo = servo.ContinuousServo(pwm)

while True:

    cp.pixels[9] = (255, 0, 0)  # Red

    cp.pixels[8] = (255, 0, 0)  # Red

    cp.pixels[7] = (255, 127, 0) # Orange

    cp.pixels[6] = (255, 255, 0) # Yellow

    cp.pixels[5] = (255, 255, 0) # Yellow (repeated)

    cp.pixels[4] = (0, 255, 0)  # Green

    cp.pixels[3] = (0, 255, 0)  # Green (repeated)

    cp.pixels[2] = (0, 0, 255)  # Blue

    cp.pixels[1] = (0, 0, 255)  # Blue (repeated)

    cp.pixels[0] = (127, 0, 255)  # Purple



    if cp.button_b:

        cp.play_tone(1000, .5)

        my_servo.throttle = 1.0

        time.sleep(.5)

        my_servo.throttle = -1.0

        time.sleep(.5)

    else:

        my_servo.throttle = 0.0



Wiring

Glue the servo motor to the bottom of the CPX holder. Solder the red wire to VOUT and A2 to orange. Then attach brown to the ground.

Assemble Butterfly

Attach the wings to the body of the butterfly. Then, attach the whole butterfly onto the top of the CPX board.