Butter Stamp

by JShap0430 in Workshop > 3D Printing

458 Views, 1 Favorites, 0 Comments

Butter Stamp

Hello, for this instructable I am going to teach you how to make a butter stamp. Before we start, set the snap grid to 1.0 mm.

Supplies

Computer

3d printer

Place a Box

From the shape selection, grab a box and bring it to the plane. We will call this shape S1.

CTW of S1

Change the width of S1 to 35 mm.

CTL of S1

Change the length of S1 to 35 mm.

CTH of S1

Change the height of S1 to 10 mm.

Add a Box

Add another box, we will call this box S2.

CTL

Change the length of S2 to 30 mm.

CTW

Change the width of S2 to 30 mm.

CTH

Change the height of S2 to 6 mm.

Raise S1

Raise S1 to 6mm

Select the Shapes

Select S1 and S2

Align

Press the align button

Press the Button

Press the middle button on the X axis

Press the Button

Press the middle button on the Y axis.

Group

Group the shapes. This combined shape will be referred to as S1.1.2

Add Shape

Add a box, this shape will be called S3

Make a Copy

Make a copy of S1.1.2 which will be called S1.2.2

Move Shapes

Move S1.1.2 and S1.2.2 out of the way

CTW

Change the width of S3 to 42 mm.

CTL

Change the length of S3 to 42 mm.

CTH

Change the height of S3 to 24 mm.

Change S1.2.2

Change S1.2.2 into a hole

Raise S1.2.2

Raise S1.2.2 to 12 mm.

Select

Select S3 and S1.2.2

Press Align

Press the align button.

Press Button

Press the middle button on the x axis

Press Button

Press the middle button on the Y axis

Group

Group the selected shapes, this will now be called S1.2.3.

Grab a Tube

Bring a tube to the plane. This will be called S4

Turn S4

Turn S4 90 degrees sideways

Raise S4

Raise S4 to 10 mm

Select the Shapes

Select S1.1.2 and S4

Align

Press Align

Align

Press the middle button on the X axis.

Press Button

Press the middle button on the Y axis.

Group

group the selected shapes.

Your Done

Congrates, Your done